# How to Clean and Maintain a Blender the Right Way

> A practical guide to cleaning a hand or jug blender: washing the blade and rubber gasket, and easy-to-avoid mistakes that cause smell or damage.

Canonical: https://mizaanhome.com/en-ae/blog/how-to-clean-and-maintain-a-blender/
Last updated: 2026-07-24

---
Your blender needs more than a quick rinse to stay clean and safe to use long term. The basic rule is simple: wash the blade and jug or mixing bowl right after every use, and check the rubber gasket regularly since it's the part most likely to trap food residue and smell. If you own a hand blender, never submerge the motor handle in water. Getting the cleaning routine right extends the blender's life and keeps whatever you blend tasting clean.

## The quick answer

**Wash the blender's blade and jug or mixing bowl with warm water and dish soap right after every use, and check the rubber gasket weekly since it's the part most likely to hold onto food smell.** If you have a hand blender, only submerge the metal blade head in water, never the motor handle. Dry every part fully before storing to prevent odor and rust around the blade edges.

## Key takeaways

- **A blender is essentially a spinning blade inside a jug or bowl connected to an electric motor**, and any water reaching the motor is a real electrical hazard ([blender definition from Britannica](https://www.britannica.com/dictionary/blender)).
- **The rubber gasket at the base of the jug is the number one source of blender smell**, because it traps moisture and tiny bits of food residue that are hard to spot from the outside ([gasket background from Britannica](https://www.britannica.com/science/rubber-chemical-compound)).
- **Washing right after use is far easier than cleaning it later**, since fruit or vegetable residue dries and sticks the longer it sits.
- **Drying every part fully before storing prevents trapped moisture**, which is the common cause of both smell and some wear around the blade edges.
- **A hand blender is cleaned differently from a jug blender**: the blade head gets rinsed under running water, while the motor handle only gets wiped with a damp cloth.

## Daily cleaning: the quick method

The easiest habit to keep your blender clean is washing it right after you're done, before fruit, vegetable, or ice residue dries onto the blade. For a jug blender: pour warm water about halfway up the jug with a drop of dish soap, run the blender for a few seconds, then rinse well. This cleans the blade from the inside without you having to touch its sharp edges by hand. For a hand blender: submerge just the metal blade head (up to the marked line in the manual, if there is one) in a bowl of warm soapy water and run it for a few seconds, then rinse under running water. The motor handle itself only gets wiped with a well wrung damp cloth, and never goes into water since it houses the electrical circuit.

## Weekly deep clean and the rubber gasket

Beyond the quick rinse after every use, set aside time weekly to take apart the removable pieces and check them separately. The rubber gasket at the base of the jug or around the blade assembly deserves the most attention: fine food residue and moisture collect in it easily, and that's the most common reason a blender looks clean on the outside but smells off when you use it. Remove the gasket if your blender's design allows it, wash it separately with soap and warm water, and dry it completely before putting it back. Check it at least once a week if you use the blender daily.

## Do and don't: a quick table

| Situation | Do | Don't |
|---|---|---|
| Washing the jug or bowl | Warm water and dish soap right after use | Let food residue dry on it all day |
| Hand blender blade head | Submerge only the metal part in water | Submerge the motor handle in water |
| Rubber gasket | Remove, wash, and dry it separately weekly | Ignore it because it's "out of sight" |
| Scrubbing the blade | Soft sponge, staying clear of the edges | Touch the blade edges directly with a bare hand |
| Storing | Dry every part fully before reassembling | Reassemble the jug while it's still damp |

## A simple accessory that makes weekly cleaning easier

If you find it hard to reach the corners of the jug or around the rubber gasket with a regular sponge, a small blender cleaning brush (with long, thin bristles) makes those tight spots a one-minute job once a week. It's not essential, an old toothbrush or a bottle brush does almost the same job, but it's a cheap, practical add-on if you'd rather have a tool built for this specific spot.

## A blender that's easy to keep clean from day one

If you haven't bought a blender yet, how the parts come apart makes a real difference to daily cleaning. A practical example from our picks: the **Braun MultiQuick 5 KIT** with a 1000W motor comes with a separate chopping bowl and whisk attachment that wash easily, and the metal blade head rinses straight under the tap without complicated disassembly. We didn't pick it for being the cheapest, we picked it because the balance of performance and easy day-to-day upkeep makes sense, which is why it tops our [guide to the best blender in the UAE](/en-ae/best/best-blender/). Check current [blender prices in the UAE](/en-ae/prices/blender-prices/) to compare options within your budget, and you'll find its current price and the Amazon.ae link in the card below.

## Bottom line

Cleaning a blender isn't complicated, but it needs a consistent habit: wash the blade and jug right after use, check the rubber gasket weekly, and never submerge a hand blender's motor handle in water. Dry every part fully before storing, and you'll get years of smell-free, efficient use. If your blender stops working despite good care, check [blender not working: what to check](/en-ae/blog/blender-not-working-troubleshooting/) before assuming it needs replacing. And if you're still choosing the right one, see our [how to choose a blender](/en-ae/guides/how-to-choose-a-blender/) guide or browse our [blenders section](/en-ae/blenders/).

## Sources

- Britannica, "Blender", definition of the blender and its core parts (the spinning blade and motor): https://www.britannica.com/dictionary/blender
- Britannica, "Rubber", background on rubber gaskets and their role in preventing leaks and trapping moisture: https://www.britannica.com/science/rubber-chemical-compound

## Where to buy

- [OXO Good Grip Deep Clean Brush Set](https://www.amazon.ae/dp/B003M8GMS6/ref=nosim)
- [Braun MultiQuick 5 KIT (1000W, chopper + whisk kit)](https://www.amazon.ae/dp/B0D9VZG1NC/ref=nosim)


---

> منهجية ميزان هوم: نعتمد على المواصفات الرسمية وإجماع تقييمات المشترين والأسعار المحلية، ولا نختبر المنتجات بأنفسنا (بلا ادعاء تجربة شخصية، وبلا تقييمات Review/AggregateRating من تأليفنا). الأسعار تقريبية ووقت النشر، وقد يحتوي الدليل على روابط تابعة.
>
> Mizaan Home method: we rely on official specifications, the consensus of buyer reviews, and local prices. We do not test products ourselves (no firsthand-testing claims, no self-authored Review/AggregateRating). Prices are approximate and correct at publication; this guide may contain affiliate links.