# How to Get Rid of a Bad Blender Smell

> A bad blender smell usually comes from residue trapped under the blade unit that rinsing can't reach. Here's the deep-clean fix and why it can return.

Canonical: https://mizaanhome.com/en-ae/blog/how-to-get-rid-of-blender-smell/
Last updated: 2026-07-23

---
A bad blender smell that regular rinsing doesn't remove usually comes from food residue trapped under the blade unit or around the rubber gasket, not the jug itself. The fix: separate the jug from the motor base, blend warm water with baking soda or lemon on the highest speed for thirty seconds for a deep clean, then take the blade unit apart if you can and check underneath it, and rinse and dry everything fully open. Here are the full steps and why the smell can return despite regular washing.

## The quick answer

**Clean the blender by blending warm water with a spoonful of baking soda or half a lemon on the highest speed for thirty seconds, then separate the blade unit and check the area underneath it, where most odor hides, and rinse and dry every part fully open before reassembling.** If the smell keeps coming back despite this clean, the cause is usually an aging or cracked rubber gasket that needs replacing, a cheap part available for most models.

## Key takeaways

- **Most bad blender smell comes from residue trapped under the blade unit**, an area a quick rinse with water and soap never reaches ([blender definition and its basic parts from Britannica](https://www.britannica.com/dictionary/blender)).
- **A quick blend cycle with warm water and baking soda or lemon cleans the jug from the inside**, since the spinning blade itself washes the corners that are hard to reach by hand.
- **Baking soda chemically absorbs odors rather than just masking them**, which is why it works so well on trapped food residue ([sodium bicarbonate properties from Britannica](https://www.britannica.com/science/sodium-bicarbonate)).
- **The rubber gasket around the blade unit cracks or loses flexibility over time**, trapping moisture and residue even after a clean that looks thorough.
- **Leaving the jug closed and wet after washing creates an extra musty smell**, so drying everything fully open is a core part of the fix, not an optional step.

## Where the smell actually comes from

A blender isn't just an empty jug, it's a spinning blade connected to a metal base and a rubber gasket that keeps liquid from leaking into the motor. Fine residue from fruit, vegetables, and protein powder slips into that area under the blade during blending, where a quick rinse under the tap never reaches. Over time, that residue breaks down and produces a musty or sour smell, even when the jug itself looks perfectly clean from the outside and in.

## The deep-clean steps

1. **Separate the jug from the motor base** first, and never deep-clean while the unit is plugged in.
2. **Fill the jug halfway with warm water**, and add a tablespoon of baking soda or half a chopped lemon.
3. **Run the blender on the highest speed for thirty seconds**, since the spinning blade cleans the interior corners on its own.
4. **Let the solution sit in the jug for five minutes**, then empty it and rinse twice with clean water.
5. **Separate the blade unit from the jug if your model's design allows it**, and check the area underneath and around the rubber gasket.
6. **Clean that area with a small soft brush and soap and water**, since it's where most stubborn residue hides.
7. **Dry every part fully open** before reassembling or storing, since trapped moisture creates a fresh smell quickly.

## Why the smell comes back despite regular washing

| Cause | Sign | Fix |
|---|---|---|
| Food residue under the blade unit | Smell despite regular surface washing | Disassemble the unit if possible and clean underneath directly |
| Aging or cracked rubber gasket | Smell returns within days of every deep clean | Replace the gasket if repeated deep cleaning doesn't fix it |
| Leaving the jug closed and wet | A mild musty or damp smell | Dry fully open after every wash, don't store it wet |

If you've tried the deep clean two or three times and the smell keeps coming back quickly, the rubber gasket is usually the cause, not a gap in your cleaning routine.

## When to replace the gasket instead of continuing to clean

The rubber gasket around the blade unit stiffens or cracks with repeated use and heat, losing its ability to keep out moisture and residue even when you clean it well. If you notice the smell returning within a few days of every deep clean, replacing that gasket, a simple and cheap part available for most models, fixes the problem permanently instead of repeating the same clean every week with no lasting result.

## A blender that's easy to take apart and clean from the start

If you're still choosing a blender and want to avoid this problem down the line, look for a model where the blade unit is easy to remove by hand for periodic cleaning. The **Braun MultiQuick 5 KIT** is a practical example: a 1000W motor, an easy-to-wash measuring beaker, and hundreds of positive reviews on Amazon.ae. We didn't pick it for being the cheapest, we picked it because the balance of power and everyday maintenance makes sense, which is also why it tops our [guide to the best blender in the UAE](/en-ae/best/best-blender/). You'll find its current price and the Amazon.ae link in the card below.

## Bottom line

A bad blender smell usually comes from residue under the blade unit, not the visible jug, and a quick blend cycle with water and baking soda or lemon plus an occasional teardown of the unit fixes it in most cases. If the smell keeps coming back quickly despite that, the rubber gasket likely needs replacing, a cheap part. If you're already looking for a replacement part, see [where to buy blender spare parts in the UAE](/en-ae/blog/blender-spare-parts-uae/), and if a daily protein shake is the cause of the smell, read [the best blender for protein shakes](/en-ae/blog/blender-for-protein-shakes/). To pick a new blender that's easy to clean from the start, see our [guide on how to choose a blender](/en-ae/guides/how-to-choose-a-blender/) or browse the [blenders section](/en-ae/blenders/).

## Sources

- Britannica, "Blender", definition of the blender and its basic parts (jug, blade, motor base): https://www.britannica.com/dictionary/blender
- Britannica, "Sodium bicarbonate", properties of sodium bicarbonate in absorbing and cleaning odors: https://www.britannica.com/science/sodium-bicarbonate

## Where to buy

- [CloudCUP Gasket Replacement Rubber Ring Seal Rings Gaskets Part for Nutribu](https://www.amazon.ae/dp/B085DSYMQD/ref=nosim)
- [Braun MultiQuick 5 (1000W, chopper + whisk kit)](https://www.amazon.ae/dp/B0D9VZG1NC/ref=nosim)


---

> منهجية ميزان هوم: نعتمد على المواصفات الرسمية وإجماع تقييمات المشترين والأسعار المحلية، ولا نختبر المنتجات بأنفسنا (بلا ادعاء تجربة شخصية، وبلا تقييمات Review/AggregateRating من تأليفنا). الأسعار تقريبية ووقت النشر، وقد يحتوي الدليل على روابط تابعة.
>
> Mizaan Home method: we rely on official specifications, the consensus of buyer reviews, and local prices. We do not test products ourselves (no firsthand-testing claims, no self-authored Review/AggregateRating). Prices are approximate and correct at publication; this guide may contain affiliate links.