# Openhagen StandByMe Headphone Stand: Check the Fit

> Considering the walnut Openhagen StandByMe? Assess its wood-and-brass design, published dimensions, and headphone fit before choosing a desktop stand.

Canonical: https://mizaanhome.com/en-us/guides/openhagen-standbyme-headphone-stand/
Last updated: 2026-10-05

**Verdict:** Choose the walnut StandByMe if you want a wood-and-brass place to hang one pair of headphones and can confirm the fit of your headband and earcups. Skip it if you need a clamp-mounted holder or confirmed dimensions for a particularly large headset.

---
We may earn a commission from our links; this guide is based on published information, not hands-on testing.

The **Openhagen StandByMe in Walnut** makes sense if your headphones need a regular place on a home desk and you prefer wood and brass to a utility hook. The buying question is whether your headset hangs comfortably from this particular stand. Its material description is clear, but the listing leaves several fit measurements open.

## Check your headset against the StandByMe

Start with your headphones, a ruler, and the place where you want to keep them. Openhagen gives **29 x 11 x 5 cm** without naming height, width, or depth. Do not use that sequence as the hanging clearance or desk footprint. Work through these checks instead:

1. **Record the headphone model and storage advice.** Check the maker's instructions for where the headband should rest. A separate suspension band needs a model-specific check; its presence alone does not tell you which stand is suitable.
2. **Identify the intended contact area.** Note the width and shape of the part that would rest on the stand. Ask Openhagen for the width and shape of the StandByMe's support surface, then compare them with the maker's guidance.
3. **Measure the hanging space you need.** At the adjustment you plan to use for storage, measure from the intended support point to the lowest earcup or attached cable connector. Allow space for the cable to hang without a sharp bend. Request the stand's usable clearance below its support, not just its overall height.
4. **Measure the clear desk area.** Record the gap beside your keyboard or monitor. Ask for the base's labeled width and depth, and leave space to lift the headset off without catching nearby objects.

Send the headphone model and these measurements with your question. A dimensioned drawing is more useful than a general assurance that the stand fits headphones. If the contact area or clearance still cannot be matched, keep using your existing storage while you compare options in the [headphone-stands guide hub](/en-us/headphone-stands/).

## Desktop stand, under-desk hanger, or case?

Choose the storage method before choosing the finish. The useful distinction is where the headphones will sit and how you will reach them.

| Storage choice | When it fits your routine | What to check |
| --- | --- | --- |
| Desktop stand such as StandByMe | You want the headphones visible and within reach beside the keyboard | Headband contact, earcup clearance, base footprint, and the path for lifting them off |
| Under-desk hanger | You want to leave the work surface clear | Mounting requirements, compatible desk edge or underside, and clearance from knees and cables |
| Protective case | You prefer to put the headphones away between uses or already have a suitable case | The headphone maker's fit instructions and where you will keep the case |

An existing case or stand that already works is a valid no-purchase choice.

## Decide whether the finish is worth paying for

The StandByMe uses solid wood and a brass pillar. This page follows the **Walnut variant**, so check that the selected finish still says Walnut when you open the product page. The Oak and black-lacquered wood options should not be treated as the same finish simply because they share the StandByMe name.

The reason to choose this stand is the combination of a dedicated storage spot and materials you want to see on your desk.

Openhagen lists **537 to 719 g** across finishes. It does not assign a separate verified weight to Walnut. Keep the cable loose and clear of places where it could be pulled; the weight range does not establish tipping resistance.

## Give the stand a practical place

Choose a level position away from the edge of the desk and leave enough room to lift the headphones off without knocking nearby objects. Route the cable so it does not need to stretch across your keyboard or walking space.

If you are also replacing the desk, settle the working surface first. The [Costway standing-desk comparison](/en-us/guides/costway-55-inch-standing-desks/) explains how raised shelves and desktop depth affect the space left around a keyboard. You can also use the [room-planning guide](/en-us/guides/homestyler-free-vs-paid-plans/) to map furniture before buying accessories.

## What to confirm before choosing it

The product card records the Walnut listing's item price checked on October 5, 2026. Use the button to confirm the selected finish and current price. Choose it when the fit checks work and the wood-and-brass finish is something you want on your desk. If either is uncertain, there is no need to replace storage that already suits your headphones.

## Sources

We assessed Openhagen's exact Walnut listing and its published material and dimension details on October 5, 2026.

- Openhagen StandByMe, Walnut, variant 48988439118169, reached through the product-card button: item price, purchase control, wood-and-brass construction, dimension sequence, and the weight range across finishes.

## Where to buy

- [Openhagen StandByMe Walnut Headphone Stand](https://plrvq.com/g/olc68kplo4cfaeb588140ad4f263fe/?ulp=https%3A%2F%2Fopenhagen.com%2Fproducts%2Fdecorative-wooden-headphone-stand%3Fvariant%3D48988439118169) (Paid link)


## Continue reading

- [Headphone stands](https://mizaanhome.com/en-us/headphone-stands/)